Utilizing braided line when bass fishing doesn’t have to be a difficult undertaking and can unlock new fishing potential. Common issues such as wind knots, line slip, casting issues, and random breaks can all be prevented with proper understanding. Braided line can also provide great casting distance with heavy lures, and the strength needed to pull bass out of heavy cover and pads with a frog or worm.
One of the most common issues seen with braided line is line slip. Line slip is when the line just spins on the spool of the reel, never engaging the drag. This can cost you the fish of a lifetime, because the drag never stopped the reel from letting out line during the hookset. Preventing line slip is simple and can be resolved in two ways.
Preventing Line Slip
As mentioned earlier, line slip caused by the line not getting any friction on the spool and spinning freely. Some reels come “braid ready,” with a strip of rubber, or band of rubber built into the line area of the spool (commonly referred to as the arbor on a fly reel). The braided line will naturally bite, or grab, the strips of rubber preventing it from spinning freely around the spool.
While many reels do have this braid ready rubber band or strip, not all reels do, and if you have an older reel, you most likely do not have one either. Not to worry though, there’s ways to prevent the line slip issue.

We’ll start first with the proper method to apply braid to the reel.
Properly spooling a reel with braid
The proper method to put braided line on a reel is to apply a backing material, normally this is just a monofilament of some sort. Typically you use a mono that is the same diameter as the braid, or slightly larger to make sure you have the strength to apply pressure on the fish without breaking the line, should it make it down to the backing. Applying the backing material first, then the braided line will prevent the braid from slipping because the mono will naturally generate the friction to prevent slipping.
This part is down to personal preference. You can be spools large enough to fill a pretty much any size reel now, but there’s definitely a cost involved. Braided line isn’t cheap, especially a quality braided line. For instance, 500 yards of 40 lb power pro Spectra is 45 dollars, running straight braid you could probably get 2, 2.5 4500 reels off one 500 yard pack. Or, you can put enough mono backing on the reel so you only have 75 – 100 yards of braid on the reel. You’ll get a lot more out of a spool of braid that way. How much line you want on the reel is entirely up to you.
Once you’ve decided how much line you want on the reel, you can now go about attaching the braid. Using your preferred line joining knot (my preference is the uni to uni knot if you don’t have one). Once joined, simply reel the line in. If the knot isn’t as small as you’d like, or you worry about the line getting caught on the tag ends of the knot you can take a piece of tape and put it over the knot on the spool. Then reel the line like normal, covering the tape. This prevents the line from getting caught, and the tape will come right off should the line come down to the backing fighting a fish (if you applied a large amount of backing, and a small amount of braid, do not use the tape method. Cut the knot and retie it, if you do not the line can get caught and cause the line to break losing the fish. Only use the tape method if you are applying a large amount of braid.).

Fill the spool till about the line is about ⅛ of an inch from the lip of the spool. You do not want to over fill braid or you’ll have casting issues. More on this below. Once filled, you are done and have properly applied braid to your reel.
Using Tape
The easiest method of preventing line slip is to use tape to secure the braided line to the spool. Cut a piece of tape (can be scotch but I prefer masking tape or packaging tape) to fit your reel or spool. Take the braid, and stick it in the center of the tape. Now with bail open, tape the line down to the spool. Close the bail and do a couple of turns of the reel handle to put line around the tape. This will hold the tape, and the braid, tight to the reel and you will never have the line slip again. The tape will also prevent any issues with line being caught in the knot used to attach the line to the spool. Since the tape is at the very base of the spool, you should never have an issue with the line coming free as well. You’d have to catch a huge fish, or completely loosen the drag for that to happen. The tape method can also be used with Mono as well to make attaching line easier.

After the cast
Now that we’ve applied braid to the reel, it’s time to go over the most common issues plaguing those who fish with it. Understanding why these issues happen will help us to better fish using braided line, and help ensure we do not lose a fish due to line breaking or knots in the line.
Line dig
Something that surprises new fishermen and anglers and anyone new to braid is line dig. Line dig happens when the braided line digs into itself on the spool, and can cause some freak miscasts, potentially even snapping the line mid cast when the braid gets stuck. This is a common issue, especially for the lighter braided lines under say 30lb test.
To prevent this from happening, you just have to pull some of the line off the reel before closing or engaging the bail (if fishing braid with a baitcaster). I call this mending the line. You’ll want to do this with just about every cast, especially as the line gets wet and saturated. Be sure to mend the line after every catch since it’s likely the fish will pull drag, putting pressure on the braid and causing it to dig in itself. This is especially true for snags as well, even more so if you like to use a stick to break the line off like you should be to fix a snag.
Wind Knots
Possibly the most annoying and frustrating aspect of fishing braided line is wind knots, because it’s very likely that you are going to have to cut a wind knot out. If you end up with a wind knot in your line, it may damage the line by putting abrasions and knots in the line. This makes it more likely for more knots to occur, or backlashes (if fishing braided line with a baitcaster). When you have a wind knot, it may be easier to deal with it by cutting both ends of the knot out and retying the lure.
Preventing wind knots is also fairly easy. The key to this is first to make sure you are using quality braid. I may be in the minority here, but I hate spider wire and I find it knots up like no other. Suffix 832 and Power Pro Spectra are my go to braids. Be wary of any braid you get for cheap off amazon and other sites like alibaba. These lines can actually be some of the worst you can use, digging and having wind knots like no other. The other critical way to prevent wind knots is to make sure you keep tension on the line as it leaves the reel in the cast, and while reeling up the slack after a cast. This is especially critical on windy days!
Also worth noting, if you are working a walking lure, or pencil popper, or popper, make sure you are keeping tension on the line while retrieving the slack. Especially on windy days!
Line breakage
I’ve covered a number of different reasons for line breaks to happen, but one thing I haven’t mentioned yet is actually with the rod itself. Or rather, the eyelets. This is less common now, but it’s entirely possible on some rods for braided line to actually eat through and start grooving the insert of the eyelet. If this happens, it will start to cut into the line as well. Fraying the braid, and eventually even cutting the line.
Another common eyelet issue is for the insert of the top eyelet to actually fall out. This can happen for various reasons, but the most common is from reeling lures too far and hitting the eyelet. Make sure you check your rod eyelets regularly, and when retrieving a lure stop before you touch the top eyelet!
Understanding Braided Line
After reading this article, you should have a much better understanding of fishing with braided line, and if you put all these tips into practice you will be able to fish braided line on any type of reel and for any kind of fish.
If you enjoyed this article, be sure to read this similar article on fishing knots: What Fishing Knots Should I Learn First and the Tips and Tricks page with other helpful articles.

Pingback: QKAwine
Pingback: бинго 37 онлайн
Pingback: HL789
Pingback: เค้กใกล้ฉัน
Pingback: เครื่องชีล
Pingback: Online-Marketing Agentur
Pingback: เมโสแฟตราคา
Pingback: โคมไฟ
Pingback: visite aqui
Pingback: เครื่องเป่าแอลกอฮอล์
Pingback: คลิปหลุดทางบ้าน
Pingback: sabaaibet
การเล่นสล็อตให้ลื่นไหลเริ่มจากตั้งกติกาส่วนตัว ก่อนเสมอ หลายคนพลาดเพราะเพิ่มเดิมพันเร็ว วิธีที่ช่วยได้คือกำหนดลิมิตต่อวัน เช่น ตั้งว่าเสียถึง Y ให้หยุด จากนั้นค่อยเลือกเกมที่เหมาะกับสไตล์ ถ้าคุณชอบภาพเรียบๆอาจชอบสล็อตคลาสสิก 3 รีล แต่ถ้าชอบกราฟิกจัดเต็มก็ไปทางสล็อตมีฟรีสปินและตัวคูณ OKHENG ได้เหมือนกัน อีกเรื่องที่ควรดูคือกติกาการซื้อโบนัส เพราะบางเกมรีสปินทำให้ผลลัพธ์ต่างกันมาก สรุปคืออ่านกติกาให้ครบคุณจะได้ประสบการณ์ที่คุมความเสี่ยงได้
ขอมาป้ายยาคนที่ชอบหมุนสล็อตเพลินๆ หน่อยครับ จากคนที่เล่นเองจริง อยากบอกว่าถ้าไม่อยากเสียเวลาไปเจอเว็บตุกติก ให้พุ่งตรงไปที่ Okheng18 ได้เลย ตัวนี้คือเว็บใหญ่ที่มั่นคงมาก ที่รวมค่ายเกมดังๆ ไว้ครบจบในที่เดียว สิ่งที่ประทับใจมากๆ จนต้องเอามาบอกต่อ คือเรื่องเล่นผ่านมือถือได้ไม่มีค้าง แถมระบบถอนหลักพันหลักแสนก็จ่ายไว เล่นได้เท่าไหร่ก็กดถอนออกได้ทันทีแบบไม่ต้องมารอลุ้น สำหรับใครที่อยากได้ที่เล่นประจำแบบยาวๆ แนะนำเลยครับ ลองสมัครเข้าไปเล่นดูสักครั้ง
Pingback: 888 Casino เว็บคาสิโนต่างประเทศตัวจริง
Pingback: บาคาร่าเงินวอน
Pingback: this post
Pingback: วีเนียร์ พังงา